Jeep CJ Wheelbase Stretch Kit
The Motobilt Jeep Wrangler CJ Wheelbase Stretch Kit is a great way to move your rear axle back roughly 6 inches. See below for the full description.
JEEP WRANGLER CJ WHEELBASE STRETCH KIT
The Motobilt Jeep CJ Wheelbase Stretch Kit is designed to use Jeep XJ rear leaf springs on the rear of your Jeep CJ (1976-1986). Installing this kit moves the rear axle back about 6 inches. The kit incorporates a custom rear bumper and shackle hangers in one part. The shackle hangers are positioned high on the bumper to keep the overall Jeep ride height lower for better center of gravity. The ends of the bumper are tapered in to allow better clearance for the shackles with the rear axle at full droop. The kit comes with a custom set of leaf spring shackles designed to clear the bumper in the range of movement. The rear bumper also features 3/4" thick d-ring recovery mounts that pass through the bumper and welded on both sides. The bumper welds to the back of the factory cross member and has two side frame plates to cover the sides.
This kit does include new spring shackles as noted. The shackles are CNC laser cut from 1/4" high strength steel plate. The shackles measure 4 inches center to center and do have a 3rd cross bolt for additional support. The kit does not include poly bushings. The kit does require removing the factory gas tank. Many people install an aftermarket fuel cell.
- The bumper is 3/16" laser cut steel plate
- 3/4" thick d-ring mounts
- incorporated shackle mounts
- moves the axle back 6 inches
- measures 38" wide
- Includes new shackles and shackle spacers
*** Bushing kit and Hardware kit sold separetely
This is considered a builder kit. It does require a qualified welding professional to install. The kit is considered off-road use only. The kit does not include poly bushings for the shackles. The kit does not include Jeep XJ springs. The Kit does not include a traction link or provisions to relocate the rear shocks. You will also need to supply parts to move your rear brake line. Requires removing the factory fuel tank to clear the new axle location.