The Motobilt MB5010-3an  was designed to fit in the back bed of your Jeep.  It is 30"x12"x12".  This will NOT fit behind your seat. Read more below.


Motobilt offers a solution for relocating the fuel tank in your Jeep, buggy, or SUV.    The Motobilt MB5010-3an was designed to fit in the back bed of your Jeep.  It is 30"x12"x12".  This will NOT fit behind your seat.  The tank has a capacity of roughly 18.7 US gallons. 


The Motobilt fuel tank is CNC cut from 1/8" 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap.  This can be converted to remote fill by purchasing a different filler neck system.


The Motobilt fuel cell mount will fit this tank perfectly. The kit consists of three parts: the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1/8" high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break.  This mount will ensure your fuel cell is mounted securely.


Just use the drop down menu to add the mount to your order.


The Motobilt tank features two #6 -AN and one brass fitting on top of the tank.  The brass fitting uses a standard hose barb fitting and has a roll over valve built into it. 

The Motobilt tank features two #6 -AN fittings on top of the tank which are tig welded into place.  The fittings are for:

1. A return line.

2. A pick up tube.  The pickup has a barb fitting inside the tank and rubber hose extending to the bottom of the tank. 

In the bottom center of the tank we have welded a trap to hold the hose in the center.  If you ever need to relocate the tube you can reach through the filler neck opening and move it.

This fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank.  It would also be used in situations where more ground clearance is needed.  

This Fuel Cell DOES NOT mount in between the frame rails.  It will only mount inside the bed of the Jeep. 

This Fuel Cell DOES NOT fit behind the factory seat. 

Write Your Own Review
Your Rating